Я начал получать эту ошибку при открытии Cisco AnyConnect,
the vpn agent service is not responding please restart this application after a minute
Все было в порядке. Единственное, что я подозреваю, это изменение файла hosts. Я восстановил его. Я пробовал много вещей, таких как очистка сокетов и добавление
в файл hosts. Он работал некоторое время, а затем снова сломался.
Я использую 64-разрядную версию Windows 7 и Cisco AnyConnect 3.1.5152.
Cisco AnyConnect Secure Mobility Client — VPN service not available. The VPN agent service is not responding
- Get link
- Other Apps
Sometime there may be a possibility that Cisco AnyConnect Secure Mobile Client can crash and service will be continuously crashing if you go and see it in services.msc. I faced this issue when my laptop was shutdown forcefully and below I listed the resolution I found..
Client Version: 3.1.04049
Resolution: Open the browser you have been using. From the options, delete the complete browsing data stored.
Then I found that service was crashing but it gave me a couple of secs opportunity to enter my password to connect to my VPN. I entered my password quickly and then I was successfully able to connect to the VPN and didn’t face this issue again. Stupid resolution but still it may be useful for few more people here..
- Get link
- Other Apps
Comments
Deciding which VPN to use? Looking for VPN reviews? Read independent Trustpilot reviews of Hide My Ass! VPN Service, hidemyass review
vpn service not available please up date
Follow the steps below to do so:
1. Go to DEVICE MANAGER
2.Look for AnyConnect Adaper, enable it if it’s disabled.
3.If there are two AnyConnect Adapters, remove the disabled one.
4.Restart the computer and check.
Post a Comment
Popular posts from this blog
Network Security: LAN manager authentication level
In windows server 2008, if we go to Network Security: LAN manager authentication level(gpedit.msc -> Computer Configuration -> WindowsSettings -> SecuritySettings LocalPolicies -> securityoptions ) and right click on it, we cannot change the value of the authentication level. It is greyed out.
To change this we need to go to following registry entry..
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlLsaLmCompatibilityLevel and set the value.
LmCompatibilityLevel should be
0 for Send LM & NTLM responses
1 for Send LM & NLTM — use NTLMv2 session security if negotiated
2 for Send NTLM response only
3 for Send NTLMv2 response only
4 for Send NTLMv2 response only
efuse LM
5 for Send NTLMv2 response only
efuse LM & NTLM
Access Edge service failed to start: Transport TLS has failed to start on local IP address
When we get the below errors in the event viewer on the edge service:
A configured transport has failed to start.
Transport TLS has failed to start on local IP address 10.x.x.x at port 5061.
Cause: Configuration error, low system resources or another program is using the specified port. Can also happen if the IP address has become invalid.
Resolution:
Ensure that the IP address specified is valid and that no other program is listening on the specified port.
Unable to bind for socket.
Transport:TLS, IP address: 10.x.x.x, Port:5061. Error:0x80072741 (The requested address is not valid in its context.).
Resolution:
Ensure that no other program is listening to the specified port and that the IP address is valid.
Then most probably the error can be that your IP address got changed and the topology builder is still using the old IP address.
This can happen when you are using DHCP instead of static assigning.
Change the IP in the topology using the topology builder on the Front end se…
I started getting this error when I open Cisco AnyConnect,
the vpn agent service is not responding please restart this application after a minute
Everything was okay. The only thing I suspect is altering the hosts file. I restored it. I tried lot of things, such as flushing the sockets and appending
in the hosts file. It worked for a while and then broke again.
I’m using Windows 7 64-bit and Cisco AnyConnect 3.1.5152.